TYPES OF MARKING OUT TOOLS AND THEIR USES.

Below is a comprehensive list of marking out tools and their uses listed out and these marking-out tools include:

READ MORE: BRIEF INTRODUCTION TO MARKING OUT

(1) SURFACE PLATES

  This is a thick rigid and very flat plate which is used as the horizontal datum. It is made of cast iron and have very flat rectangular surface.

(2) ANGLE PLATES

  These are heavy and rigid, and the workpiece may be clamped finally to them on the surface plate. Angle plates are made from cast iron.

(3) VEE - BLOCKS

  Vee Blocks are supplied in pairs. They are rectangular with a vee-shaped recess in one side and are used on the surface plate to support cylindrical works. Vee Blocks are made of chilled cast iron.

(4) SCRIBERS

  The Scriber is a thin rod with very hard, fine pointed ends which is used to cut the lines in the surface of the workpiece. Scribers are made from hardened and tempered high carbon or cast steel.

(5) SCRIBING BLOCK

  The Scribing Block has an accurately machined flat base and a supporting pillar upon which is mounted a scriber with a hooked end. The scriber can be clamped at any desired position on the pillar, and then brought into contact with the work. 

Finally, the base of the scribing block is held firmly against the surface plate and moved slowly so that the scriber marks a line on the component. By raising or lowering the scriber point, lines parallel to the first can be marked on the work. Scribing Block is made from high carbon or cast steel.

(6) STEEL RULE

  The rule is usually graduated in millimeters and inches measurements are picked from the steel rule.

(7) TRY SQUARE

   The Try Square is used with the feeler gauges to check the accuracy of right angled corners and with a scriber to mark out lines at 90 degrees to an accurate edge.

(8) DIVIDERS

  This is used to transfer measurements from a rule and to scribe circles and arcs.

(9) HERMAPHRODITE CALIPERS

  They are used to to scribe lines parallel to an accurate edge, The hooked end being drawn along the edge.

(10) CENTER PUNCH

  The center punch is used to mark light points on scribed lines which are the limits of a surface or edge.

READ MORE: TOP 7 PRECAUTIONS TO TAKE WHILE USING THE MARKING OUT TOOLS

This platform also gives an avenue for everyone to post or share a related Story/Experience about a furniture or wood work or anything art or craft design on the comment box or send your works to EMAIL : mfwshareyourstory@gmail.com specifying your (Name, and Details of your work)  and watch your comments become a major post for people to view and relief that experience with you. Pictures are also highly welcomed along side your posts. Acknowledgements and Full credits would be given to those who deem it fit to share their related posts with this platform. 

PLEASE DON'T FORGET TO SHARE, COMMENT, FOLLOW US, LIKE MY PAGE, AND SUBSCRIBE TO OUR PUSH ENGAGE NOTIFICATION SYSTEM TO GET OUR LATEST UPDATES.

Please Share With Us How You Feel About This Post..

Read More

TOP BEST WAYS TO TAKE CARE OF YOUR MEASURING INSTRUMENTS

The following precautions should be taken when using measuring instruments of all types:


READ MORE: 4 Most Best Used Measuring Instruments you must have in a workshop

(1) Clean both the measuring faces of the instruments and the work-piece very carefully to remove all dirt's, oil, and metal chip.

(2) Check the instrument for accuracy before using. Adjust and re-check, if necessary.

(3) Do not use on any moving surface.

(4) Do not hold the instrument on the hands for longer than is necessary. The heat of the hand is sufficient to cause an expansion which will affect the accuracy of the reading.

(5) Keep the measuring faces at right angles to the work-piece.

(6) Avoid excessive pressures on micrometer spindle. Use the ratchet. Do not over strain the fine adjustment device on the vernier caliper.

(7) Do not use measuring instrument for any purpose for which they were not designed.

(8) Do not throw precision instrument down on to the bench - keep them apart from ordinary tools and always return them to their cases when not actually in use.

(9) Clean after use and give a thin film of non - corrosure oil.

READ MORE: TOP 7 PRECAUTIONS TO TAKE WHILE USING THE MARKING OUT TOOLS


This platform also gives an avenue for everyone to post or share a related Story/Experience about a furniture or wood work or anything art or craft design on the comment box or send your works to EMAIL : mfwshareyourstory@gmail.com specifying your (Name, and Details of your work)  and watch your comments become a major post for people to view and relief that experience with you. Pictures are also highly welcomed along side your posts. Acknowledgements and Full credits would be given to those who deem it fit to share their related posts with this platform. 

PLEASE DON'T FORGET TO SHARE, COMMENT, FOLLOW US, LIKE MY PAGE, AND SUBSCRIBE TO OUR PUSH ENGAGE NOTIFICATION SYSTEM TO GET OUR LATEST UPDATES.

Please Share With Us How You Feel About This Post..

Read More

The Framed Peacock, a wonderful artwork design by a facebook user.

   

I can actually say that this is one of the most astonishing artworks i have seen today, I love creative people especially the one's that are best at it because that is one of the reasons why this platform was built. "MyFurniturezWorld Blog" was created to help uplift and promote the world of art and craft-work Designs to enable us imbibe the culture of creative thinking by bringing our ideas, dreams and designs into reality through the help of wood-works and then turning it into "FURNITURE" so as to beautify our homes and environments in order to make the world a better, lovely and presentable place to live in.

 I was captivated by this wonderful artwork design done by a noble facebook user by name "Ravenwing Hughes" which according to her, named her work as "The Framed Peacock". 
Her artwork depicts a true image of a peacock popularly known all over the world for its Amazing Nature of Pride, Beauty, and Dignity.

    The peacock is highly known for it's characteristics, It is one of the most beautiful bird in india, Their adoring beauty and astonishing feathers has long been used for adornment. It is said to be the National Bird of India and a Physical Representation of the Hera, Queen of the God's.
See Pictures below>>

Read More>>
Check out this Paper Robot Design done by this handsome little kid

                                                                                 Photo Credit: Ravenwing Hughes

This platform also gives an avenue for everyone to post or share a related Story/Experience about a furniture or wood work or anything art or craft design on the comment box or send your works to EMAIL : mfwshareyourstory@gmail.com specifying your (Name, and Details of your work)  and watch your comments become a major post for people to view and relief that experience with you. Pictures are also highly welcomed along side your posts. Acknowledgements and Full credits would be given to those who deem it fit to share their related posts with this platform. 

PLEASE DON'T FORGET TO SHARE, COMMENT, FOLLOW US, LIKE MY PAGE, AND SUBSCRIBE TO OUR PUSH ENGAGE NOTIFICATION SYSTEM TO GET OUR LATEST UPDATES.

Please Share With Us How You Feel About This Post..

Read More

Awesome Spray Painting work done by a young lady facebook user

 Just a few hours ago i shared the a post on PAPER ROBOT DESIGN , I was astonished when i saw the use of brush and paint being brought into creativity and i love it when i see raw talents being brought into a creative reality...This young beautiful lady facebook user by name NIDHI JETHVA has decided to share a part of her awesome work with the world..isn't that wonderful??
The painting is self explanatory and showcases the wonderful art of Nature and the beauty of Africa..
This is really an amazing painting work.
See pictures below>>

Read More>> 
The Framed Peacock, a wonderful artwork design by Ravenwing Hughes

                                                                                                 Photo Credit: Nidhi Jethva

This platform also gives an avenue for everyone to post or share a related Story/Experience about a furniture or wood work or anything art or craft design on the comment box or send your works to EMAIL : mfwshareyourstory@gmail.com specifying your (Name, and Details of your work)  and watch your comments become a major post for people to view and relief that experience with you. Pictures are also highly welcomed along side your posts. Acknowledgements and Full credits would be given to those who deem it fit to share their related posts with this platform. 

PLEASE DON'T FORGET TO SHARE, COMMENT, FOLLOW US, LIKE MY PAGE, AND SUBSCRIBE TO OUR PUSH ENGAGE NOTIFICATION SYSTEM TO GET OUR LATEST UPDATES.

Please Share With Us How You Feel About This Post..

Read More

Check out this Paper Robot Design done by this little Handsome Kid.

Just a few hours ago, I shared a post on  Awesome Spray Painting Work done by a Young Lady Facebook User, I am a big fan of art especially when it comes to Artworks and Crafts. While i was busy scrolling through my facebook page i came across this fascinating craft work done by this little handsome kid which he shared on facebook. His mum would be so proud of him as she exclaims in joy saying "My Son Made a Craft"...guess what this paperwork is all about?

He made a full standing robot using a paper, probably one the robots he has seen in one the cartoons but what marvelled me was how he was able to do that with a paper.
I call that an art of Ideology in Creativity.

See pictures of this lovely paper robot design made by little kid below..

Also see>>  

The Framed Peacock, a wonderful artwork design by Ravenwing Hughes

                                           Photo Credit: SHIULI NATH

This platform also gives an avenue for everyone to post or share a related Story/Experience about a furniture or wood work or anything art or craft design on the comment box or send your works to EMAIL : mfwshareyourstory@gmail.com specifying your (Name, and Details of your work)  and watch your comments become a major post for people to view and relief that experience with you. Pictures are also highly welcomed along side your posts. Acknowledgements and Full credits would be given to those who deem it fit to share their related posts with this platform. 

PLEASE DON'T FORGET TO SHARE, COMMENT, FOLLOW US, LIKE MY PAGE, AND SUBSCRIBE TO OUR PUSH ENGAGE NOTIFICATION SYSTEM TO GET OUR LATEST UPDATES.

Please Share With Us How You Feel About This Post..

Read More

12 Important Machine Tool Safety Precautions you need to know.

(1) Use the right size of blade for the screws.

(2) Use a crescent wrench on the blade to get more torque.

(3) You will get more driving force with a shorter shank.

(4) For the stubborn screw, fit the driver in the screw put as much downward pressure as you can on the screw driver, and strike the end with a hammer. This will pop the screw loose and it also helps with worn out or stripped out screws.

(5) Some people can magnetize a screw driver by holding it up and striking it with a metal bar. This process realigns the molecules, making it magnetic. But be extremely careful when doing this to avoid breaking the screwdrivers.

(6) Get a prybar, keep it with your screw driver, and each time you need a prybar, leave your screw drivers alone.

(7) Before you drive screws into hardwood, make sure to put beeswax on the thread of screws as this will make the screws driving more easier. If you don't have a beeswax, you can use soap alternatively.


I HOPE IT WAS HELPFUL???


This platform also gives an avenue for everyone to post or share a related Story/Experience about a furniture or wood work or anything art or craft design on the comment box or send your works to EMAIL : mfwshareyourstory@gmail.com specifying your (Name, and Details of your work)  and watch your comments become a major post for people to view and relief that experience with you. Pictures are also highly welcomed along side your posts. Acknowledgements and Full credits would be given to those who deem it fit to share their related posts with this platform. 

PLEASE DON'T FORGET TO SHARE, COMMENT, FOLLOW US, LIKE MY PAGE, AND SUBSCRIBE TO OUR PUSH ENGAGE NOTIFICATION SYSTEM TO GET OUR LATEST UPDATES.

Please Share With Us How You Feel About This Post..

Read More

Top 7 Best Tips to Getting the Most Out Of Your Screwdriver.

                      

I have been able to draft out some basic best tips for you so as for you to get the most out of your screwdrivers, and i hope they are helpful for you. 

 (1) Use the right size of blade for the screws.

(2) Use a crescent wrench on the blade to get more torque.

(3) You will get more driving force with a shorter shank.

(4) For the stubborn screw, fit the driver in the screw put as much downward pressure as you can on the screw driver, and strike the end with a hammer. This will pop the screw loose and it also helps with worn out or stripped out screws.

(5) Some people can magnetize a screw driver by holding it up and striking it with a metal bar. This process realigns the molecules, making it magnetic. But be extremely careful when doing this to avoid breaking the screwdrivers.

(6) Get a prybar, keep it with your screw driver, and each time you need a prybar, leave your screw drivers alone.

(7) Before you drive screws into hardwood, make sure to put beeswax on the thread of screws as this will make the screws driving more easier. If you don't have a beeswax, you can use soap alternatively.

This platform also gives an avenue for everyone to post or share a related Story/Experience about a furniture or wood work or anything art or craft design on the comment box or send your works to EMAIL : mfwshareyourstory@gmail.com specifying your (Name, and Details of your work)  and watch your comments become a major post for people to view and relief that experience with you. Pictures are also highly welcomed along side your posts. Acknowledgements and Full credits would be given to those who deem it fit to share their related posts with this platform. 

PLEASE DON'T FORGET TO SHARE, COMMENT, FOLLOW US, LIKE MY PAGE, AND SUBSCRIBE TO OUR PUSH ENGAGE NOTIFICATION SYSTEM TO GET OUR LATEST UPDATES.

Please Share With Us How You Feel About This Post..

Read More

The Flash Spectrum of the Sun

 In clear Madras, Oregon skies, this colorful eclipse composite captured the elusive chromospheric or flash spectrum of the Sun. Only three exposures, made on August 21 with telephoto lens and diffraction grating, are aligned in the frame. Directly imaged at the far left, the Sun's diamond ring-like appearance at the beginning and end of totality brackets a silhouette of the lunar disk at maximum eclipse. Spread by the diffraction grating into the spectrum of colors toward the right, the Sun's photospheric spectrum traces the two continuous streaks. They correspond to the diamond ring glimpses of the Sun's normally overwhelming disk.

Image Credit & Copyright: Yujing Qin (University of Arizona)

Writeup Credit: Vladimir Pecha

The Flash Spectrum of the Sun

This platform also gives an avenue for everyone to post or share a related Story/Experience about a furniture or wood work or anything art or craft design on the comment box or send your works to EMAIL : mfwshareyourstory@gmail.com specifying your (Name, and Details of your work)  and watch your comments become a major post for people to view and relief that experience with you. Pictures are also highly welcomed along side your posts. Acknowledgements and Full credits would be given to those who deem it fit to share their related posts with this platform.

 
PLEASE DON'T FORGET TO SHARE, COMMENT, FOLLOW US, LIKE MY PAGE, AND SUBSCRIBE TO OUR PUSH ENGAGE NOTIFICATION SYSTEM TO GET OUR LATEST UPDATES.

Please Share With Us How You Feel About This Post..

Read More

OFFICE CHAIRS IDEAS AND TYPES

 An office chair or Desk chair

      An office chair or Desk chair is a type of chair designed for use at a desk office usually a swivel chair with a set of wheels for mobility and adjustability height.

The office chair was strategically designed to increase the productivity of clerical employees by making it possible for them to remain sitting at their desks for long period of time. Although there are multiples kinds of chairs designed to suit different needs. These chairs generally cannot be sat on for more than a couple of hours at a time without becoming uncomfortable, though they often offer more room to move than higher-end chairs.

      These types of office chairs are generally discussed below though there are many more but just only a few will be discussed here...

                                      TYPES OF OFFICE CHAIRS

CONFERENCE/PASSIVE CHAIRS

These are special kinds of chairs used for large meetings or conference spaces often difficult to furnish which has adjustable features like height and lumbar supports, as well as casters for mobility with a combination of comfort and style to make an impression on visitors..

MESH ERGONOMIC CHAIRS

Mesh ergonomic chairs are popularly known to have such features as light, breathable, good looking, and built in a modern style. It offers support for your lumber region which makes comfort more easier and helps to spread your body weight across a larger area, reducing the pressure that your hips, buttocks, and spine incurs. They are also good choice for a conference room or home office where users are not sitting for a long period of time.

                                                                                                                  

STACKING  CHAIRS

Stack chairs also called MULTI-PURPOSE chairs comes in variations of types and are special kind of chairs which are lightweight, enough for easy storage and stylish enough to compliment your interiors. They are lightly padded or simply molded plastics and are intended for high traffic and duration of use.

                                                             

                           

                          
BIG AND TALL CHAIRS 

These types of chairs are higher weight capacity type of chairs which are built especially for larger people. The chairs are wider, and are built from stronger material to accommodate more weight, often up to 300 to 500 pounds, making them sturdier and more comfortable for big and tall employees.

                             

                                       

TASK CHAIRS 

Task chairs are versatile type of chair which the user can configure for their individual size. They are specifically designed for office work and are indispensable to employees well being and comfort, to provide a more productive enjoyable, and efficient working environment. This type of chairs offers feature such as Adjustable seat height, Tilt tension, Back lock, Lumbar support and Arm adjustability that users can fine tune to personal preference to provide good and relaxing comfort.

                 







This platform also gives an avenue for everyone to post or share a related Story/Experience about a furniture or wood work or anything art or craft design on the comment box or send your works to EMAIL : mfwshareyourstory@gmail.com specifying your (Name, and Details of your work)  and watch your comments become a major post for people to view and relief that experience with you. Pictures are also highly welcomed along side your posts. Acknowledgements and Full credits would be given to those who deem it fit to share their related posts with this platform. 

PLEASE DON'T FORGET TO SHARE, COMMENT, FOLLOW US, LIKE MY PAGE, AND SUBSCRIBE TO OUR PUSH ENGAGE NOTIFICATION SYSTEM TO GET OUR LATEST UPDATES.

Please Share With Us How You Feel About This Post..

Read More