The following precautions should be taken when using measuring instruments of all types:
READ MORE: 4 Most Best Used Measuring Instruments you must have in a workshop
(1) Clean both the measuring faces of the instruments and the work-piece very carefully to remove all dirt's, oil, and metal chip.
(2) Check the instrument for accuracy before using. Adjust and re-check, if necessary.
(3) Do not use on any moving surface.
(4) Do not hold the instrument on the hands for longer than is necessary. The heat of the hand is sufficient to cause an expansion which will affect the accuracy of the reading.
(5) Keep the measuring faces at right angles to the work-piece.
(6) Avoid excessive pressures on micrometer spindle. Use the ratchet. Do not over strain the fine adjustment device on the vernier caliper.
(7) Do not use measuring instrument for any purpose for which they were not designed.
(8) Do not throw precision instrument down on to the bench - keep them apart from ordinary tools and always return them to their cases when not actually in use.
(9) Clean after use and give a thin film of non - corrosure oil.
READ MORE: TOP 7 PRECAUTIONS TO TAKE WHILE USING THE MARKING OUT TOOLS
This platform also gives an avenue for everyone to post or share a related Story/Experience about a furniture or wood work or anything art or craft design on the comment box or send your works to EMAIL : mfwshareyourstory@gmail.com specifying your (Name, and Details of your work) and watch your comments become a major post for people to view and relief that experience with you. Pictures are also highly welcomed along side your posts. Acknowledgements and Full credits would be given to those who deem it fit to share their related posts with this platform.
PLEASE
DON'T FORGET TO SHARE, COMMENT, FOLLOW US, LIKE MY PAGE, AND SUBSCRIBE
TO OUR PUSH ENGAGE NOTIFICATION SYSTEM TO GET OUR LATEST UPDATES.
Please Share With Us How You Feel About This Post..
READ MORE: 4 Most Best Used Measuring Instruments you must have in a workshop
(1) Clean both the measuring faces of the instruments and the work-piece very carefully to remove all dirt's, oil, and metal chip.
(2) Check the instrument for accuracy before using. Adjust and re-check, if necessary.
(3) Do not use on any moving surface.
(4) Do not hold the instrument on the hands for longer than is necessary. The heat of the hand is sufficient to cause an expansion which will affect the accuracy of the reading.
(5) Keep the measuring faces at right angles to the work-piece.
(6) Avoid excessive pressures on micrometer spindle. Use the ratchet. Do not over strain the fine adjustment device on the vernier caliper.
(7) Do not use measuring instrument for any purpose for which they were not designed.
(8) Do not throw precision instrument down on to the bench - keep them apart from ordinary tools and always return them to their cases when not actually in use.
(9) Clean after use and give a thin film of non - corrosure oil.
READ MORE: TOP 7 PRECAUTIONS TO TAKE WHILE USING THE MARKING OUT TOOLS
This platform also gives an avenue for everyone to post or share a related Story/Experience about a furniture or wood work or anything art or craft design on the comment box or send your works to EMAIL : mfwshareyourstory@gmail.com specifying your (Name, and Details of your work) and watch your comments become a major post for people to view and relief that experience with you. Pictures are also highly welcomed along side your posts. Acknowledgements and Full credits would be given to those who deem it fit to share their related posts with this platform.
Please Share With Us How You Feel About This Post..
I think what you posted made a lot of sense. But, what about this?
ReplyDeletesuppose you added a little content? I mean, I don't wish to
tell you how to run your website, but what if you added a title that makes people want more?
I mean "TOP BEST WAYS TO TAKE CARE OF YOUR MEASURING INSTRUMENTS" is a little plain. You could peek at Yahoo's home page and see how they write
news headlines to get people interested.
You might add a video or a picture or two to grab people interested about everything've
got to say. Just my opinion, it would bring your blog a little bit more interesting.
ReplyDeletethank you sirfor that wonderful feedback .. we will do well to make amends where needed .. please note that our system is now back and will begin its functionality any moment from now as we would be changing our blog design look to a more better look thanks.. always stay tuned with us for more